Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

12.06.2025 00:03

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

I post the exact comment here.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Has anyone ever really waited that long and gotten a paper check mailed 20 days ago?

What does a fuse do?

Can the fuse protect the electronic devices from lightning instead of a surge protector.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

U.S. Space Force awards BAE Systems $1.2 billion contract for missile-tracking satellites - SpaceNews

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

What is lightning?

He then describes Rainy Season and Lightning.

How to watch Apple’s WWDC 2025 keynote - TechCrunch

Upvotes:

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

WWDC 2025: iOS 26 Rumored Features - MacRumors

This is where this question deviates from being a 'generic' question, and becomes more specific.

the problem then depends on "how fast does the fuse operate?".

Edit 2024–10.

What great song was "ruined" once you really listened to the lyrics?

a photo is worth a thousand words.

what exactly is a ‘surge’ protector?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

Murray State clinches first MCWS appearance, becomes fourth No. 4 seed to make it to Omaha - NCAA.com

Barnstars:

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

(Dc diagram shown, AC is similar).

What was your most memorable experience catching a fraudulent car seller?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

so, what happens?

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

What are 5 ways that can be done by the community to improve the public transport system?

The MOV will conduct when the voltage exceeds 50% of line voltage.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

At one ohm, the resistor has a maximum of 1 watt power.

Common Diabetes Drug Linked to 'Exceptional Longevity' in Women - ScienceAlert

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Upcoming Telescope Predicted to Discover Millions of Hidden Solar System Objects - Gizmodo

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

nine

[old diagram got deleted by accident]

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

He then describes the function of a fuse.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

This is where the MOV conducts again, and dissipated the energy.

This one hit behind the barn.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

[image of Common-mode choke]

For this case there are devices called Metal oxide varistors (MOV).

2024–10–16 [ OO OLAOYE OYEBODE ]

An AC voltage/ current source, and an ac inductive load.

In schematic diagrams this is the symbol for a fuse:

A fuse is a non-resetable over current circuit protector.

but I think this circuit , shows a few more pieces.

Here is a simplified AC power diagram.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Because the load is inductive, the current lags the voltage.(by a bit).

There are two important concepts here.

It seems Mohan does not understand the difference between a comment and an Answer.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

The third is lightning and “how it gets conducted into a home.”

This is the picture of an electronic coil of wire wound around a core of magnetic material.

2024–10–10[John johnson John Johnson ]

But it can get overloaded, and no longer works.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

It also is a device that limits the change in current flow.

These devices are installed between the “hot” and “neutral” and protective ground.

At least they know the answer if they wanted it.

The bolt then partially travels down the line to your home.

He then asserts :

So, the voltage could go up to 500 volts, and the fuse will not open up.

This is 'the assistant's answer'

But… the neutral is now “floating” because of the 1 ohm resistance.

There are three different concepts here that are getting confused.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Now when you have a certain ac resistance, then a current flows in a loop.

The other is “what does a “fuse” do?”

First Sentence:

eight

One

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

This device then solves the entire problem.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

A circuit breaker is similar, but is resettable.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

One is “what exactly is in a ‘surge protector’ ? ”

2024–10–14 [Omar Gharbi Omar Gharbi ]

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

but this device (an Inductor) … impedes the rapid changes in the current.

These are simplified answers to the original question, and does not change anything I wrote above.